Showing posts with label AeroPress. Show all posts
Showing posts with label AeroPress. Show all posts

Wednesday, March 11, 2009

Ready Set Joe!

I wrote here about how I have found that I could make a good cup of coffee with my 12-cup drip-brew coffeemaker while using a lot less coffee than I've been using in my beloved Aerobie AeroPress.

The other day I found Melitta's Ready Set Joe Single Cup Coffee Brewer (uses #2 Melitta filters with Flavor Pores, either white or natural brown - $3.99/100) at the Kroger grocery store after looking for it at half a dozen other stores (and failing to find it or its larger sibling), so I snatched up two of them for $2.99 each, one for home and one for the office. All they had was black, but it also comes in red (and maybe other colors as well). (Note: The new Ready Set Joe design replaces the older version by adding openings that let you see how much water has dripped into the cup, instead of totally covering the top of the cup; it also eliminates the side coffee-cup-like handle.)

As much as I've liked my AeroPress, I find that the Melitta makes a better-tasting (IMO) cup of coffee, with less effort and less cleanup (and less coffee needed per cup). I currently use an AeroPress scoop (~37 ml, vs. 30 ml for standard 2 TBSP coffee measure), ground at drip grind, and slowly pour (and repour) hot water after it's boiled in my teakettle into the filter until I've created about a 10-11 oz. cup of coffee.  As the water drips through, gently keep pouring more water into the filter, being sure to wash down the grinds from the sides of the filter so all the coffee gets thoroughly brewed. Keep a second cup right next to the one you're brewing over so you can remove the Ready-Set-Joe when your cup has the 10-11 oz. you want and set it on top of the extra/overflow cup so it can keep dripping if it still has water in it.

I suspect that letting the water cool down a bit might make the coffee a little less bitter, if one prefers their coffee that way. Also, some suggest stirring the coffee slurry in the filter that you get after you first pour in the water. I don't know if this makes much of a difference if you slowly and carefully soak the grinds thoroughly. It can definitly foam up if the coffee is really freshly-roasted, so be careful as you fill the filter with water; the #2 filter is not very large, and you don't want it to overflow/overfill.

The nice thing about this system is that, like the AeroPress, it gives you total control over the coffee-making: i.e., the grind, the water temperature, and the brew/drip time. Automatic dripmakers largely take the water temperature control out of your hands, though some let you adjust the brew/drip time by an adjustable dial for the strength of the coffee. And make no mistake about it - the water temperature can make a huge difference in the taste. Brew two cups, one with water just after it boils in your tea kettle, and another after you wait 30 seconds after your hot water boils, and see how different they can taste. Some coffees taste better if brewed with hotter water; sometimes it depends on how old the coffee is - e.g., I may do a 20-second wait-to-pour with a fresh bag of beans, yet find that if I'm using the same beans 2 weeks later, a hotter water temperature is needed to make it taste better.

The paper filter, as in the AeroPress, absorbs the cholesterol-raising chemicals in coffee, yet the micropores (unlike the AeroPress) seem to (or supposedly) allow more of the coffee oils through, making for a better-tasting cup of coffee. All I know is that I like the coffee better than a French Press or the AeroPress.

Better-tasting coffee, at a better per-cup price. How cool is that!

Monday, January 5, 2009

Dollars and Sense: Drip Brew Vs. AeroPress (Part 2)

Earlier I wrote a comparison of the cost-per-cup of drip-brew versus AeroPress.

During the holidays I made coffee in my 12-cup GE Drip-Brew coffeemaker. I used one 30 ml (2 TBSP) coffee measure of beans (ground for drip - i.e., halfway between espresso and French press) for every two 5-oz. cups of coffee = 30 ml beans per 10 oz. cup of coffee = 3 ml beans per 1 oz. coffee.

(I also did the same with my Hamilton Beach Brewmaster, but the coffee tasted slightly bitter; I suspect the HB heats the water to a higher temperature.)

Translating this to the 38 ml AeroPress scoop should give about 12.7 oz. coffee per AeroPress scoop. I made an 11 oz. cup with 1 AeroPress scoop of ground coffee (halfway between espresso and drip), stirring and letting the coffee "brew" for 1 minute, rather than the usual 10-20 sec. recommended, in order to extract more coffee flavor. It wasn't bad, and almost brings the AeroPress cost down to the price of using the drip-brew coffeemaker.

Maybe I'll look for a Melitta 1-4 cup cone for a truer "drip" brew.

Friday, November 28, 2008

Dollars and Sense: Drip Brew Vs. AeroPress

The AeroPress scoop holds about 36cc, versus 30cc in a standard 2TB coffee measure.

I have been grinding and using 2 AeroPress scoops for about 10 oz. of coffee = 1 scoop per 5 oz. coffee = 0.20 AP scoop per 1 oz. coffee.

Last night, because we had several guests, I used the drip coffeemaker. I used 6 coffee measures of beans (= 5 AeroPress scoops), and ground the beans for drip grind (versus the finer grind I use for the AeroPress), and added water for 9 cups (= 45 oz.), which equals 5 AeroPress scoops for 45 oz. coffee = 1 AP scoop per 9 oz. coffee. It tasted pretty good.

This is just slightly over half (i.e., 55%) as much coffee per brewed cup, i.e., 0.11 AP scoop per 1 oz. coffee.

I'll have to make a 9 oz. AP cup using just one AP scoop to see how it tastes. Maybe I've been making my coffee too strong.

Sunday, April 20, 2008

Coffee: Why You Should Use Paper Filters

As you can read from the links in this post, paper filters eliminate almost all of the LDL-raising diterpenes from coffee. The French Press method, considered to be the "ideal" way of making coffee, is thus not good as far as cholesterol is concerned, and metal (gold) filters also don't protect you from these diterpenes.

While you can rinse and reuse the AeroPress filters, the amount of diterpenes increases, per this post. (The test rinsed the filter after 10 uses, and it showed that a rinsed filter resulted in nearly double the diterpenes of a new filter; I don't know if rinsing after one pressing would show the same increase in the subsequent pressing.) Since the filters cost only 1 cent each, it probably makes sense to use a new filter each time, which is what I'll now do.

(This suggests to me that espresso, being unfiltered, is also not good for LDL levels.)

Sunday, April 13, 2008

AeroPress: Less Coffee, More Taste

Alan Adler, Inventor of the Aerobie AeroPress

As many have commented, the AeroPress uses more coffee per serving than other methods (e.g., French Press). I earlier posted my coffee-stretching/saving solution.

Alan Adler, the inventor of the AeroPress (and the Aerobie Flying Ring - pictured behind him), has this to say about getting more from the AeroPress:
For those who want more extraction from the AeroPress, here are some ways to accomplish that:

Use finer grind, that requires a VERY GENTLE pressing. That in turn takes longer and you get more extraction from the fine grind AND from the longer wet time. My experience is that you can push extraction up to 25% this way with no increase in acidity or bitterness.

Press more water through the bed of coffee. That both extracts more and reduces the strength of brew trapped in the puck. My experience is that this noticeably increases bitterness. But rasqual [a CoffeeGeek Forum poster] likes this approach.

Use hotter water. This may be better anyway for light roasts -- even if you're not seeking to reduce coffee expense.

Have fun, do a lot of tasting comparisons. They needn't be blind, but side-by-side comparisons are recommended.

Best regards,

Alan
I thus may tinker further with my procedure. Since I already use my grinder's finest setting, I'll try a combination of longer extraction times and less water (I currently press all 10 oz or so through a 1-scoop serving; maybe I'll cut that in half to about 5 oz. of hot water).

Tuesday, April 8, 2008

A Great Cup Of Coffee!

Thursday night (4/3/08) I stopped by Texas Roast (Highland Village) and picked up a pound of fresh coffee beans because some friends were coming over for dessert and coffee.

I was told the coffee had just been roasted that day or the night before, and it must have been true, because it was still degassing (i.e., expelling the CO2 that roasting causes the beans to give off), for when I brewed some AeroPress coffee with it, it foamed all over the place!

I bought the Fireside Roast, and in the words of Agent Dale Cooper, it makes "a damn fine cup of coffee."

Two days later I made a cup with beans I had ground Thursday night, and it was still fresh-tasting and great!

Thursday, January 3, 2008

AeroPress Update

I have found an improved way to make coffee with my AeroPress that also saves on the amount of coffee one uses.

The recommended method is to use about 1 AeroPress scoop (36-38 ml versus a typical 30 ml (2 TB) coffee scoop) of beans per serving, put the ground coffee in the large tube, add the appropriate amount of water, plunge, and then fill your cup with water to make a full cup of coffee (i.e., ~6 oz. liquid coffee total per AeroPress scoop).

A method that seems to extract more flavor and hence uses less coffee (but it's only good for one cup at a time*), and also results in a better-tasting cup of coffee, IMO**, is to plunge all the water through the ground coffee. I.e.:
  1. Using a bit less than 1 AeroPress scoop of beans, grind it fine (espresso grind) and put the ground coffee as usual in the large outer tube that is on your empty cup while you're heating your water.
  2. Pour enough hot water into the inner tube/plunger to fill it (8 oz. all the way to the rim).
  3. When the hot water is at the desired temperature (165-175° or whatever you have come to like), pour it slowly at first (to moisten and expand the grounds) and then completely into the outer tube.
  4. Stir with the paddle for 10 seconds or so as usual.
  5. Plunge for 20 seconds or so as usual.
  6. Drink and enjoy!
If you use a full AeroPress scoop, you will likely find that you will have to add a couple more ounces of water to the drink, either to the outer tube in addition to the 8 oz. from the inner tube/plunger before you plunge, or into the cup after you have plunged the coffee, or the coffee will be too strong.

* If you want a larger cup, then use 2 shallow AeroPress scoops ground a bit coarser than espresso in the outer tube, and reserve 16 oz. of the heated water in, e.g., a 2-cup measuring beaker. When it's the right temperature, pour slowly as much of the water as you can into the outer tube until it's almost at the top, and stir it for 10 seconds or so with the paddle. Since some water/coffee will have dripped into the cup, top off the outer tube with more water just before you plunge, and then after you have plunged the coffee, use what's left of the 16 oz. measure of hot water to fill your cup, and stir. You will still have plunged most of the water through the coffee, so you'll have the extra-taste benefits this method produces.

** The new instructions for the AeroPress say:
If I am just making a single cup, can I push all the water for the cup through the press? Yes, but when you push a full cup of water past the grounds it extracts bitterness. Diluting your espresso-sized pressing with hot water makes a much smoother brew.
This has not been my experience, however. YMMV.

Wednesday, October 10, 2007

"Good, Hot, Black Coffee"

A coworker, for whom I made his first cup of AeroPress coffee yesterday, agrees with me that the reason most people do not like strong, black coffee ("black as midnight on a moonless night") is because they have never had a good (as in "great") cup of coffee. It's either been brewed at the wrong temperature or for too long so it's too bitter, or the beans were not freshly-roasted and freshly-ground, or it's a combination of some or all of these things. Thus, they doctor it up or cover it up with milk and sugar and flavorings and/or dilute it to weaken its bad qualities, not realizing that coffee isn't supposed to taste that way - and doesn't have to.

One day, some day ... I'm going to try roasting my own beans at home. But that's not so urgent, as I now have four reasonably close sources for fresh-roasted coffee: Bookish Coffee, Texas Roast, Dunn Bros, and Addison Coffee Roasters. If it's been roasted within two days of buying it, it should be about the same as doing it myself, since fresh-roasted coffee needs a day or two to degas (coffee gives off CO2 for a couple days after it's been roasted) and reach optimal flavor before grinding and brewing.

But no matter how you brew it - whether with a drip coffee maker or a French Press or an AeroPress - the first rule for making great coffee is to use freshly-roasted beans that have been freshly ground. (The second rule is to use the right amount of coffee when making it - i.e., about 2 Tablespoons per 6 oz. cup. The third and fourth rules have to do with using the proper grinder and grind, and the right water temperature.) Whole bean coffee is good for a week or two after roasting, and ideally should not be ground until the day you are going to drink it. Don't buy any more coffee than you will use within two weeks of the roast date, if possible. This means that if you want the best coffee, you'll have to say "good-bye" to ground coffee and prepackaged off-the-shelf coffee beans and bulk beans that have been sitting for who knows how long. These can all be acceptable, and sometimes even good. But why settle for poor or at best "good" coffee when you can enjoy great coffee?

Now, watch this video:


Saturday, September 29, 2007

Aerobie AeroPress - Great Coffee!

After reading the reviews, I bought an Aerobie AeroPress. Yes, the flying ring makers have made a coffee maker that looks like a chemist's set and ... makes great coffee.

My first cup was smooth and rich-tasting as promised. Based on the many user reviews, one may want to experiment with the grind and the amount of coffee and water (and water temperature) to get one's favorite cup, but it can make a crema-less espresso (or near espresso) to drink straight or in a latte or cappuccino, as well as (by adding more hot water) regular coffee.

$30. No electricity. (You'll need a source of hot water - a microwave or electric tea kettle - and you can put your water in the plunger tube per the measuring marks and heat it in the microwave, so it's great for travel and a hotel microwave, or just use hot water from a hotel coffeemaker.) No moving parts. A little labor, and even less time, and ... voila! A great cup of coffee.

If only all the world's problems could be solved this easily.

You can buy it
locally and internationally, as well as via Amazon.com (from third parties).

Read some of the reviews at Amazon or at
CoffeeGeek.com, and those at the links at the bottom of the Aerobie AeroPress Webpage (and the "Frequently Asked Questions" link on that same page).

This test review demonstrates
why it doesn't make true espresso, but great coffee, equaling or besting machines costing many times as much.

If you're a French Press person, here is my earlier post about
French Press coffee, as well as about good coffee in general.

And ...
these guys just opened up a shop 2 miles down the road from our house. On-site fresh-roasted coffee for about $10 a pound. I'll never lack for fresh-roasted beans again. (Sorry, Starbucks.) Whoo-hoo!

Watch the video on the AeroPress Webpage.

- - -

UPDATE October 3, 2007: After some minor experimentation, I find I like the coffee ground at espresso grind (the finest grind on my Starbucks Barista burr grinder) or maybe one step coarser. (Per the instructions, if you make more than 2 scoops at a time, you need to use a coarser grind, as it's difficult to compress the air in the tube with that much coffee at a superfine grind.)

I use 2 AeroPress scoops, which I press with water filled to the "(2)" level in the plunger, and pour a little hot water over the stirring paddle just before I press in order to wash the grounds from the paddle back into the coffee mixture. After pressing, I dilute it in the cup with hot water to about a 11-12 oz. cup of coffee.

The AeroPress scoop is about 36 cc (versus 30 cc for the standard 2-Tablespoon coffee measure) and doubles as an espresso server, holding the amount of a single espresso in case one wants to divide multiple servings among several cups. So I'm using about 20% more coffee per cup than with a French press (i.e., 72 cc for 12 oz. of coffee = 6 cc ground coffee per 1 oz. of water, versus 2 TB = 30 cc per 6 oz. water in a French Press = 5 cc ground coffee per 1 oz. of water), perhaps because the very short brew time requires a bit more coffee to achieve the desired strength, or maybe because I can make the coffee stronger since it has no bitterness.

UPDATE October 5, 2007: I notice that the coffee doesn't seem to have the aroma that coffee from my French Press had. At times it has tasted a bit "flat," too. This is a result of the paper filter absorbing some of the flavor oils (one reason I was a bit cautious about the AeroPress).
Some have recommended letting it steep longer - i.e., for 1 minute or even a French-Press-comparable 3 minutes - by first inserting the plunger and then inverting it, and pouring the coffee and water in via the bottom of the tube (and covering it until ready to put on the cap and filter and turn it over and plunge it), or by pulling the plunger UP slightly after insertion to create a slight vacuum and prevent any flow-through until ready to plunge. (If you pull it up too much, though, it will suck the filter away from the cap, and the water will start pouring through!)

Even then, though,
there are apparently limits that the AeroPress can't pass.

I discovered that I've been making it way too hot. I've been waiting a few seconds after my tea kettle boiled before pouring the water, but when I poured water into the plunger and first used a digital instant-read thermometer to see when it reached 175°, I was surprised that it took a lot longer than I expected. So I now pour out my water before the boil and use the thermometer to check the temperature before pouring it into the coffee, as the AeroPress instructions recommend 165-175° for optimum flavor.

UPDATE October 10, 2007: Despite the lack of some of the flavor oils, AeroPress coffee has its own flavor and quality that still makes it (to me) about the best cup of coffee I've had. While it may be worth the trouble to get a 5 micron polyester filter and use the inverted (i.e., upside-down) method to get the oils into the cup
as the folks here suggest, I am currently pretty content with the regular AeroPress procedure with the AeroPress paper filters.

UPDATE October 20, 2007: I bought a second AeroPress today so I wouldn't have to bring mine home every weekend.

Shortly after I had gotten my $125 (retail) Starbucks Barista conical burr grinder, I did a blind comparison with my $20 blade grinder using my drip coffeemaker. The burr ground coffee had a noticeably fuller flavor.

Based on comments of other AeroPress users, I decided to see if there was any noticeable difference with the AeroPress between burr-ground coffee and blade-ground coffee. I ground 1.5 scoops of a fresh decaf Sumatra City Roast (roasted yesterday) in each of my grinders, and pressed/brewed them both at the same time with 175° water I had filled to the "(2)" mark in the plunger. As far as I could tell, there was not a noticeable difference in taste.

This means that I can take my quiet blade grinder to work and grind my beans there before making each cup. The coffee will taste fresher and I won't have to wake my wife up with the noise of the burr grinder (or even the blade grinder) each morning. On the other hand, it's quite a bit messier, esp. digging out the compacted fine coffee, so I may continue with my burr grinder, but grind it the night before or in another room.

UPDATE November 15, 2007: Though I initially used the Espresso grind setting (or one step coarser) on my Starbucks Barista Burr grinder, I found that the coffee was perhaps too fine, because it took a lot of pressure (and time) to push the water through. Grinding it three steps coarser than Espresso - i.e., about halfway between Espresso Grind and Drip Grind - seems to a better setting. While I found that the coffee tasted just as good if I used a blade grinder (and I even took mine to work for awhile in order to grind the beans right before brewing), the fineness of the grind made it very difficult to press, so I went back to using the burr grinder at home and taking ground coffee to work.