Showing posts with label Coffee. Show all posts
Showing posts with label Coffee. Show all posts

Saturday, October 6, 2012

Abid Clever Coffee Dripper


Abid Clever Coffee Dripper.

(FYI - the commercial tune is "Ziggy Stardust" by David Bowie)

I finally got this in 2012 (with a matching lid), and it's been my brewer of choice ever since. I got mine from Sweet Maria's (I have the large size that uses #4 filters - NOTE: Drinking unfiltered coffee has been linked to increased blood cholesterol; also see this AJCN study).

A few things I've determined:
  • For the freshest and best-tasting coffee:
    • Buy only whole bean coffee as close to the roasting date as possible. If it wasn't just roasted, then buy it only in sealed bags, not from open bins or jars. My preferred coffee these days is whole bean Major Dickason's Blend by Peet's Coffee. The roasting date is clearly labeled on the 12 oz. bag, which I usually finish within 2 weeks.
    • Keep the coffee beans tightly sealed off from air between uses, either in 16 oz. Mason Jars using a vacuum sealer Mason Jar lid attachment, or in the original bag rolled shut as tight as possible each time you close it. The vacuum sealer method is better, based on my experience using both. 2014 Update: I now use the 64 oz. AirScape canister as being easier than having to repeatedly vacuum-seal a Mason Jar.
    • Grind only as much coffee as you will use within 24-48 hours or so.
    • If not brewing it immediately, put the freshly-ground coffee in a sealed container with as little air space as possible. If you can still smell the coffee from within the container, use a different container or wrap it with plastic wrap; if you can smell the coffee, it means that air is getting to the coffee and degrading its freshness.
    • Don't buy more whole bean coffee than you will use in two weeks, especially if you grind fresh beans every day or two and are thus repeatedly opening and closing the bag or container.
  • When putting the Clever Coffee Dripper on your cup, be sure to remove the lid part-way; otherwise, it creates a partial vacuum and the coffee will never fully drain into the cup.
  • Though I haven't compared the taste with generic or other cone filters, I use the Melitta #4 filters with micro-perforations (white; the "natural" ones are not more ecologically friendly, and per some people may impart a taste to the coffee), which should allow some of the flavorful coffee oils to pass through the filter.
My Clever Coffee Dripper method:
  1. Grind the coffee beans for drip grind (i.e., halfway between Espresso fine and French Press coarse); you'll need a good quality burr grinder to do this, which start at more than $100, unless you get a good manual hand grinder - read online reviews before you buy. I probably use the equivalent of 2 TBSP coffee (i.e., 1 standard coffee scoop) per 6 oz. water, varying it for the roast I use and the strength I want. If you want to be precise, use a scale to measure the weight of the coffee, an exact amount of water per gm of coffee, and an instant-read thermometer to ensure a precise water temperature before pouring it on the grounds. While I'm definitely pickier than most people, I'm (not yet) chemistry-lab picky.
  2. Set the timer for 3 minutes (4 minutes brewing time before setting it on the cup to drain is too long) while boiling the water.
  3. When the water boils, pour into a measuring cup the amount of water you're going to use, which also lets it cool off a bit from boiling temperature. Despite the video, I don't pre-rinse the filters to get rid of the "paper taste," as I have not noticed a difference when doing so when using the white filters.
  4. Start the timer and pour the water from the measuring cup slowly over all the grounds in the filter cone to make sure they're fully and evenly soaked. You can then gently stir the floating grounds (I use a chopstick) or push them down with a spoon (like in the video), or just wait to do so at the 1-minute-to-go mark per the next step. (I stir them once at the beginning and then a second time about halfway through or when there is about 1 minute to go.) Put on the lid to keep the water hot (this all takes about 30 seconds).
  5. At the 1-minute-to-go mark (i.e., after 2 minutes), [again] gently stir or submerge the floating grounds and replace the lid.
  6. When the timer rings after 3 minutes of brewing, put the Coffee Dripper on the cup and partially slide the lid off the top to prevent a partial vacuum while still keeping the coffee as warm as possible.
  7. It will take the coffee about a minute to fully drain into the cup, and if you do things right, there will be a nice rounded mound of coffee grounds at the bottom of the filter (versus them being spread evenly all up and down the sides of the filter).
  8. Enjoy!

Friday, November 20, 2009

Tuesday, May 26, 2009

Wake Up And Smell The Coffee!

Coffee's Aroma Kick-starts Genes In The Brain

ScienceDaily (June 16, 2008) — Drink coffee to send a wake-up call to the brain? Or just smell its rich, warm aroma? An international group of scientists is reporting some of the first evidence that simply inhaling coffee aroma alters the activity of genes in the brain.

In experiments with laboratory rats, they found that coffee aroma orchestrates the expression of more than a dozen genes and some changes in protein expressions, in ways that help reduce the stress of sleep deprivation.

Han-Seok Seo and colleagues point out that hundreds of studies have been done on the ingredients in coffee, including substances linked to beneficial health effects. "There are few studies that deal with the beneficial effects of coffee aroma," they note. "This study is the first effort to elucidate the effects of coffee bean aroma on the sleep deprivation-induced stress in the rat brain."

In an effort to begin filling that gap, they allowed lab rats to inhale coffee aroma, including some rats stressed by sleep deprivation. The study then compared gene and protein expressions in the rats' brains. Rats that sniffed coffee showed different levels of activity in 17 genes. Thirteen of the genes showed differential mRNA expression between the stress group and the stress with coffee group, including proteins with healthful antioxidant activity known to protect nerve cells from stress-related damage.

Journal reference:

Han-Seok Seo et al. Effects of Coffee Bean Aroma on the Rat Brain Stressed by Sleep Deprivation: A Selected Transcript- and 2D Gel-Based Proteome Analysis. Journal of Agricultural and Food Chemistry, June 25, 2008 DOI: 10.1021/jf8001137
Adapted from materials provided by American Chemical Society.

Wednesday, March 11, 2009

Ready Set Joe!

I wrote here about how I have found that I could make a good cup of coffee with my 12-cup drip-brew coffeemaker while using a lot less coffee than I've been using in my beloved Aerobie AeroPress.

The other day I found Melitta's Ready Set Joe Single Cup Coffee Brewer (uses #2 Melitta filters with Flavor Pores, either white or natural brown - $3.99/100) at the Kroger grocery store after looking for it at half a dozen other stores (and failing to find it or its larger sibling), so I snatched up two of them for $2.99 each, one for home and one for the office. All they had was black, but it also comes in red (and maybe other colors as well). (Note: The new Ready Set Joe design replaces the older version by adding openings that let you see how much water has dripped into the cup, instead of totally covering the top of the cup; it also eliminates the side coffee-cup-like handle.)

As much as I've liked my AeroPress, I find that the Melitta makes a better-tasting (IMO) cup of coffee, with less effort and less cleanup (and less coffee needed per cup). I currently use an AeroPress scoop (~37 ml, vs. 30 ml for standard 2 TBSP coffee measure), ground at drip grind, and slowly pour (and repour) hot water after it's boiled in my teakettle into the filter until I've created about a 10-11 oz. cup of coffee.  As the water drips through, gently keep pouring more water into the filter, being sure to wash down the grinds from the sides of the filter so all the coffee gets thoroughly brewed. Keep a second cup right next to the one you're brewing over so you can remove the Ready-Set-Joe when your cup has the 10-11 oz. you want and set it on top of the extra/overflow cup so it can keep dripping if it still has water in it.

I suspect that letting the water cool down a bit might make the coffee a little less bitter, if one prefers their coffee that way. Also, some suggest stirring the coffee slurry in the filter that you get after you first pour in the water. I don't know if this makes much of a difference if you slowly and carefully soak the grinds thoroughly. It can definitly foam up if the coffee is really freshly-roasted, so be careful as you fill the filter with water; the #2 filter is not very large, and you don't want it to overflow/overfill.

The nice thing about this system is that, like the AeroPress, it gives you total control over the coffee-making: i.e., the grind, the water temperature, and the brew/drip time. Automatic dripmakers largely take the water temperature control out of your hands, though some let you adjust the brew/drip time by an adjustable dial for the strength of the coffee. And make no mistake about it - the water temperature can make a huge difference in the taste. Brew two cups, one with water just after it boils in your tea kettle, and another after you wait 30 seconds after your hot water boils, and see how different they can taste. Some coffees taste better if brewed with hotter water; sometimes it depends on how old the coffee is - e.g., I may do a 20-second wait-to-pour with a fresh bag of beans, yet find that if I'm using the same beans 2 weeks later, a hotter water temperature is needed to make it taste better.

The paper filter, as in the AeroPress, absorbs the cholesterol-raising chemicals in coffee, yet the micropores (unlike the AeroPress) seem to (or supposedly) allow more of the coffee oils through, making for a better-tasting cup of coffee. All I know is that I like the coffee better than a French Press or the AeroPress.

Better-tasting coffee, at a better per-cup price. How cool is that!

Monday, January 5, 2009

Dollars and Sense: Drip Brew Vs. AeroPress (Part 2)

Earlier I wrote a comparison of the cost-per-cup of drip-brew versus AeroPress.

During the holidays I made coffee in my 12-cup GE Drip-Brew coffeemaker. I used one 30 ml (2 TBSP) coffee measure of beans (ground for drip - i.e., halfway between espresso and French press) for every two 5-oz. cups of coffee = 30 ml beans per 10 oz. cup of coffee = 3 ml beans per 1 oz. coffee.

(I also did the same with my Hamilton Beach Brewmaster, but the coffee tasted slightly bitter; I suspect the HB heats the water to a higher temperature.)

Translating this to the 38 ml AeroPress scoop should give about 12.7 oz. coffee per AeroPress scoop. I made an 11 oz. cup with 1 AeroPress scoop of ground coffee (halfway between espresso and drip), stirring and letting the coffee "brew" for 1 minute, rather than the usual 10-20 sec. recommended, in order to extract more coffee flavor. It wasn't bad, and almost brings the AeroPress cost down to the price of using the drip-brew coffeemaker.

Maybe I'll look for a Melitta 1-4 cup cone for a truer "drip" brew.

Friday, November 28, 2008

Dollars and Sense: Drip Brew Vs. AeroPress

The AeroPress scoop holds about 36cc, versus 30cc in a standard 2TB coffee measure.

I have been grinding and using 2 AeroPress scoops for about 10 oz. of coffee = 1 scoop per 5 oz. coffee = 0.20 AP scoop per 1 oz. coffee.

Last night, because we had several guests, I used the drip coffeemaker. I used 6 coffee measures of beans (= 5 AeroPress scoops), and ground the beans for drip grind (versus the finer grind I use for the AeroPress), and added water for 9 cups (= 45 oz.), which equals 5 AeroPress scoops for 45 oz. coffee = 1 AP scoop per 9 oz. coffee. It tasted pretty good.

This is just slightly over half (i.e., 55%) as much coffee per brewed cup, i.e., 0.11 AP scoop per 1 oz. coffee.

I'll have to make a 9 oz. AP cup using just one AP scoop to see how it tastes. Maybe I've been making my coffee too strong.

Sunday, April 20, 2008

Coffee: Why You Should Use Paper Filters

As you can read from the links in this post, paper filters eliminate almost all of the LDL-raising diterpenes from coffee. The French Press method, considered to be the "ideal" way of making coffee, is thus not good as far as cholesterol is concerned, and metal (gold) filters also don't protect you from these diterpenes.

While you can rinse and reuse the AeroPress filters, the amount of diterpenes increases, per this post. (The test rinsed the filter after 10 uses, and it showed that a rinsed filter resulted in nearly double the diterpenes of a new filter; I don't know if rinsing after one pressing would show the same increase in the subsequent pressing.) Since the filters cost only 1 cent each, it probably makes sense to use a new filter each time, which is what I'll now do.

(This suggests to me that espresso, being unfiltered, is also not good for LDL levels.)

Sunday, April 13, 2008

AeroPress: Less Coffee, More Taste

Alan Adler, Inventor of the Aerobie AeroPress

As many have commented, the AeroPress uses more coffee per serving than other methods (e.g., French Press). I earlier posted my coffee-stretching/saving solution.

Alan Adler, the inventor of the AeroPress (and the Aerobie Flying Ring - pictured behind him), has this to say about getting more from the AeroPress:
For those who want more extraction from the AeroPress, here are some ways to accomplish that:

Use finer grind, that requires a VERY GENTLE pressing. That in turn takes longer and you get more extraction from the fine grind AND from the longer wet time. My experience is that you can push extraction up to 25% this way with no increase in acidity or bitterness.

Press more water through the bed of coffee. That both extracts more and reduces the strength of brew trapped in the puck. My experience is that this noticeably increases bitterness. But rasqual [a CoffeeGeek Forum poster] likes this approach.

Use hotter water. This may be better anyway for light roasts -- even if you're not seeking to reduce coffee expense.

Have fun, do a lot of tasting comparisons. They needn't be blind, but side-by-side comparisons are recommended.

Best regards,

Alan
I thus may tinker further with my procedure. Since I already use my grinder's finest setting, I'll try a combination of longer extraction times and less water (I currently press all 10 oz or so through a 1-scoop serving; maybe I'll cut that in half to about 5 oz. of hot water).

Tuesday, April 8, 2008

A Great Cup Of Coffee!

Thursday night (4/3/08) I stopped by Texas Roast (Highland Village) and picked up a pound of fresh coffee beans because some friends were coming over for dessert and coffee.

I was told the coffee had just been roasted that day or the night before, and it must have been true, because it was still degassing (i.e., expelling the CO2 that roasting causes the beans to give off), for when I brewed some AeroPress coffee with it, it foamed all over the place!

I bought the Fireside Roast, and in the words of Agent Dale Cooper, it makes "a damn fine cup of coffee."

Two days later I made a cup with beans I had ground Thursday night, and it was still fresh-tasting and great!

Thursday, January 24, 2008

How Much Will YOU Pay For Good Coffee?

I love coffee (good coffee, that is!), but I think this is a bit much: At Last, a $20,000 Cup of Coffee

Be sure to view the
slideshow of pictures.

A more down-to-earth opinion (that also corrects the $20,000 figure) from CoffeeGeek.com:
Posted Tue Jan 29, 2008, 1:34am
Subject: Re: $20,000 Coffee Machine
--------------------------------------------------------------------------------
I paid a visit to the new Blue Bottle today. On my way in I saw James Freeman, who was leaving. After learning that he was illegally parked and that taking his space was not likely to save me a ticket, I asked him why the device I was going in to look at cost $20,000. His comment was something to the effect that the cost issue was overblown. Apparently the reporter asked him what the whole rather impressive-looking setup cost. Thinking it over, and factoring in the cost of the ice-drip apparatus, the burners, the sneeze guard, the installation and the 75 or so backup Hario pots ($100-150 apiece is my guess), he threw out a ballpark number of $20,000. This then became the story reported on the Continent and points east as the "$20,000 cup of coffee".

The place was busy. I successfully feigned nonchalance when asked for $10.85 for my pot of Sidamo DP, and sat down, fortuitously, right in front of The Apparatus. The theatre is impressive indeed. I want one of those things and I will likely strongly consider one for our next store. I may even fashion one to upgrade our existing Octagon location, where the Clover is overwhelmed by demand.

There were many things that caused some concern. Number one, the wait was almost 25 minutes, in which time I saw perhaps 5 pots go out. That struck me as excessive. Also, I think too much has been made of the bamboo paddle and stirring technique. I didn't get the impression that the two bartenders were exercising any particular skill. I may have missed that one, though. The price also seemed high, for $1.00 worth of ingredient cost, and a higher than average labor cost. Lastly, and this was the real kicker, the coffee was only good. I expected (hoped, is more accurate) to be floored. I wasn't. I place the blame for this specifically on the New York Times and generally on the culture of hype that surrounds our industry sometimes. I imagine that while it's great to have the publicity and the consequent lines of customers, James might concur with me on this last point. There is a pitfall in unrealistic expectations. This is vacuum coffee, afterall, such as any self-respecting CoffeeGeek would make at home, and that many of us grew up with.

The service was quick, attentive and professional. The lavender and sea salt "pairing" caramels were really good. The experience was great. I'll be going back. For regular old espresso. And the remarkable spectacle of the siphon bar. It's a bit like a Corvette that way. A fun car to watch someone else drive.

James, I hope I didn't offend with this commentary. I very much enjoyed meeting you, and I loved the new store. You deserve all your success. I'm glad you enjoyed Lulu's at the Octagon. Do ask for me next time you're in. I'd love to buy you a drink and chat some more.
More info and links here.

Thursday, January 3, 2008

AeroPress Update

I have found an improved way to make coffee with my AeroPress that also saves on the amount of coffee one uses.

The recommended method is to use about 1 AeroPress scoop (36-38 ml versus a typical 30 ml (2 TB) coffee scoop) of beans per serving, put the ground coffee in the large tube, add the appropriate amount of water, plunge, and then fill your cup with water to make a full cup of coffee (i.e., ~6 oz. liquid coffee total per AeroPress scoop).

A method that seems to extract more flavor and hence uses less coffee (but it's only good for one cup at a time*), and also results in a better-tasting cup of coffee, IMO**, is to plunge all the water through the ground coffee. I.e.:
  1. Using a bit less than 1 AeroPress scoop of beans, grind it fine (espresso grind) and put the ground coffee as usual in the large outer tube that is on your empty cup while you're heating your water.
  2. Pour enough hot water into the inner tube/plunger to fill it (8 oz. all the way to the rim).
  3. When the hot water is at the desired temperature (165-175° or whatever you have come to like), pour it slowly at first (to moisten and expand the grounds) and then completely into the outer tube.
  4. Stir with the paddle for 10 seconds or so as usual.
  5. Plunge for 20 seconds or so as usual.
  6. Drink and enjoy!
If you use a full AeroPress scoop, you will likely find that you will have to add a couple more ounces of water to the drink, either to the outer tube in addition to the 8 oz. from the inner tube/plunger before you plunge, or into the cup after you have plunged the coffee, or the coffee will be too strong.

* If you want a larger cup, then use 2 shallow AeroPress scoops ground a bit coarser than espresso in the outer tube, and reserve 16 oz. of the heated water in, e.g., a 2-cup measuring beaker. When it's the right temperature, pour slowly as much of the water as you can into the outer tube until it's almost at the top, and stir it for 10 seconds or so with the paddle. Since some water/coffee will have dripped into the cup, top off the outer tube with more water just before you plunge, and then after you have plunged the coffee, use what's left of the 16 oz. measure of hot water to fill your cup, and stir. You will still have plunged most of the water through the coffee, so you'll have the extra-taste benefits this method produces.

** The new instructions for the AeroPress say:
If I am just making a single cup, can I push all the water for the cup through the press? Yes, but when you push a full cup of water past the grounds it extracts bitterness. Diluting your espresso-sized pressing with hot water makes a much smoother brew.
This has not been my experience, however. YMMV.

Thursday, November 22, 2007

We Have ... Coffee!

Per some comments at Coffeegeek.com, I figured: "$9.99? Why not?" and bought this popcorn maker at Walgreens ($3.00 mail-in rebate, too!) and tried roasting some coffee. It's a 1200 watt popper. Everyone's favorite, the no-longer-made West Bend Poppery I, is 1500 watts, I believe, and the Poppery II is 1200 watts, I think.

I put 2/3 cup or so of some green unroasted decaf Sumatra beans I had bought at
Dunn Bros Coffee a few weeks ago into the popping chamber, and used an empty canned green beans can for a chimney. You need the chimney because as the coffee roasts, it gets lighter in weight, and the spinning/blowing of the popper will propel the beans up and out of the popping chamber unless you have a long chimney.

(To make the chimney, I removed both ends of the can with a can opener and cut about eight 1"-long slashes around one end so I could compress the end diameter to fit into the opening of the popcorn maker - a soup can was too narrow for this popper.)

The plastic cover for the popper sits closer to the popping chamber than some others I've seen, and I was afraid the heat would melt it, so I roasted the coffee with the cover off and the chimney extending the height of the chamber.

I then went outside and plugged it in. It was apparently too cold outside, though, because after several minutes, while the beans had darkened somewhat in color, they were not roasting or smoking or cracking.

So I brought it inside and continued the process by the stove-top ventilation fan, and the beans started darkening in color and even cracked a bit and started getting a bit of an oily sheen. There was no chaff (decaf beans don't have chaff, but regular beans do - lots of it, apparently, which is another reason to roast outdoors so it doesn't blow all over the house) and only one bean caught on fire. I never did get any smoke, but I tasted a bean when it was looking pretty dark, and since it seemed done, I turned off the popper and cooled the beans outside by stirring them with a wooden spoon in a metal colander.

We ground and brewed the beans, and they tasted pretty good - a medium-tasting roast (though they looked darker than that), with a lot of "foaming" in the AeroPress since I didn't give them a day to degas.

I did another batch at about 10:15 p.m. indoors. I didn't get any smoke this time, either. Maybe it's the roasting chaff that creates the smoke, and since there is hardly any chaff on decaf beans, there is also little or no smoke. It took longer than I expected, and I couldn't hear the second crack, but the beans are fairly dark. I put them in a plastic bag for grinding and brewing in the morning.

The instructions say to use no more than 1/2 cup of popcorn kernels to prevent overheating. I tried roasting 1/2 cup of beans with the popcorn cover on, but I still had beans popping out of the cover, so it seems that I need to use the chimney without the cover. Also, 2/3 cup of beans seems to roast fine without overheating the popcorn maker.

The following isn't the best video, but it shows and explains the process. It doesn't show the inside of the correct popper very well, though, so you can't really see how the vents are on the side of the chamber, but if you examine hot air corn poppers, you'll easily see what it means for the vents to be on the side of the chamber.


Sunday, October 28, 2007

Storing Coffee Beans - To Vac, Or Not To Vac?

As a test, on 10/13/07 I put two AeroPress scoops each of Sumatra Decaf coffee beans that had been roasted on 10/12/07 into four pint mason jars as follows, to be tasted and compared after about 2 weeks:

A. Vacuum-sealed (with a home vacuum sealer and mason jar lid attachment), and not opened.
B. Vacuum-sealed, and opened and then vacuum-sealed again every day.
C. Closed (not vacuum-sealed), and not opened.
D. Closed, and opened every day.

I opened them all on 10/28 and did a taste comparison, using the AeroPress. My subjective opinion/results:

#1 for flavor: Coffee A.
#2 for flavor: Coffee B.
#3 for flavor: Coffee C. (Very close to B., however.)
#4 for flavor: Coffee D.

Vacuum sealing thus does seem to help retain the freshness. Probably the best thing would be to put a freshly-roasted pound of coffee beans into four mason jars, vacuum-seal the jars (and check them each day the first couple days, for they may still be degassing and undo the vacuum), and take out and grind 2 days' worth of coffee at a time to cut in half the number of times one would have to reopen and re-vacuum-seal the jar before finishing it and starting on the next jar. The resultant loss in flavor of ground coffee over 2 days versus 1 day may negate this benefit, though, and daily grinding might still be the best choice.

Also, I could take a jar to work and grind it there. Since the pint jar of beans will be used up in a few days, it won't spend two weeks being opened and closed, so it should taste better than Coffee D.

I only had 2 AeroPress scoops of coffee in each mason jar - i.e., about the equivalent of 2.5 regular 2 TBSP coffee scoops - so there was a lot of air space in the jars. I suspect that if I kept the non-vacuum-sealed coffee in a reasealable sandwich bag from which I could expel much of the air each time I opened and reclosed it, it would taste very close to the vacuum-sealed coffee. Probably the best system would be to use actual vacuum bags for the beans, and cut open and revacuum each day the one I'm using after taking out the coffee, which would pretty much eliminate all air around the beans while they're not being used. I think a good compromise between this ideal method and efficiency/cost (i.e., not having to pay for vacuum bags, and not having to vacuum reseal every day) would be to keep the beans in full vacuum-sealed mason jars with little air space, and keep the beans I'm using in a resealable sandwich bag. Since I only buy 1 lb. of coffee at a time, it will all be gone in less than 2 weeks.

Wednesday, October 10, 2007

"Good, Hot, Black Coffee"

A coworker, for whom I made his first cup of AeroPress coffee yesterday, agrees with me that the reason most people do not like strong, black coffee ("black as midnight on a moonless night") is because they have never had a good (as in "great") cup of coffee. It's either been brewed at the wrong temperature or for too long so it's too bitter, or the beans were not freshly-roasted and freshly-ground, or it's a combination of some or all of these things. Thus, they doctor it up or cover it up with milk and sugar and flavorings and/or dilute it to weaken its bad qualities, not realizing that coffee isn't supposed to taste that way - and doesn't have to.

One day, some day ... I'm going to try roasting my own beans at home. But that's not so urgent, as I now have four reasonably close sources for fresh-roasted coffee: Bookish Coffee, Texas Roast, Dunn Bros, and Addison Coffee Roasters. If it's been roasted within two days of buying it, it should be about the same as doing it myself, since fresh-roasted coffee needs a day or two to degas (coffee gives off CO2 for a couple days after it's been roasted) and reach optimal flavor before grinding and brewing.

But no matter how you brew it - whether with a drip coffee maker or a French Press or an AeroPress - the first rule for making great coffee is to use freshly-roasted beans that have been freshly ground. (The second rule is to use the right amount of coffee when making it - i.e., about 2 Tablespoons per 6 oz. cup. The third and fourth rules have to do with using the proper grinder and grind, and the right water temperature.) Whole bean coffee is good for a week or two after roasting, and ideally should not be ground until the day you are going to drink it. Don't buy any more coffee than you will use within two weeks of the roast date, if possible. This means that if you want the best coffee, you'll have to say "good-bye" to ground coffee and prepackaged off-the-shelf coffee beans and bulk beans that have been sitting for who knows how long. These can all be acceptable, and sometimes even good. But why settle for poor or at best "good" coffee when you can enjoy great coffee?

Now, watch this video:


Saturday, September 29, 2007

Aerobie AeroPress - Great Coffee!

After reading the reviews, I bought an Aerobie AeroPress. Yes, the flying ring makers have made a coffee maker that looks like a chemist's set and ... makes great coffee.

My first cup was smooth and rich-tasting as promised. Based on the many user reviews, one may want to experiment with the grind and the amount of coffee and water (and water temperature) to get one's favorite cup, but it can make a crema-less espresso (or near espresso) to drink straight or in a latte or cappuccino, as well as (by adding more hot water) regular coffee.

$30. No electricity. (You'll need a source of hot water - a microwave or electric tea kettle - and you can put your water in the plunger tube per the measuring marks and heat it in the microwave, so it's great for travel and a hotel microwave, or just use hot water from a hotel coffeemaker.) No moving parts. A little labor, and even less time, and ... voila! A great cup of coffee.

If only all the world's problems could be solved this easily.

You can buy it
locally and internationally, as well as via Amazon.com (from third parties).

Read some of the reviews at Amazon or at
CoffeeGeek.com, and those at the links at the bottom of the Aerobie AeroPress Webpage (and the "Frequently Asked Questions" link on that same page).

This test review demonstrates
why it doesn't make true espresso, but great coffee, equaling or besting machines costing many times as much.

If you're a French Press person, here is my earlier post about
French Press coffee, as well as about good coffee in general.

And ...
these guys just opened up a shop 2 miles down the road from our house. On-site fresh-roasted coffee for about $10 a pound. I'll never lack for fresh-roasted beans again. (Sorry, Starbucks.) Whoo-hoo!

Watch the video on the AeroPress Webpage.

- - -

UPDATE October 3, 2007: After some minor experimentation, I find I like the coffee ground at espresso grind (the finest grind on my Starbucks Barista burr grinder) or maybe one step coarser. (Per the instructions, if you make more than 2 scoops at a time, you need to use a coarser grind, as it's difficult to compress the air in the tube with that much coffee at a superfine grind.)

I use 2 AeroPress scoops, which I press with water filled to the "(2)" level in the plunger, and pour a little hot water over the stirring paddle just before I press in order to wash the grounds from the paddle back into the coffee mixture. After pressing, I dilute it in the cup with hot water to about a 11-12 oz. cup of coffee.

The AeroPress scoop is about 36 cc (versus 30 cc for the standard 2-Tablespoon coffee measure) and doubles as an espresso server, holding the amount of a single espresso in case one wants to divide multiple servings among several cups. So I'm using about 20% more coffee per cup than with a French press (i.e., 72 cc for 12 oz. of coffee = 6 cc ground coffee per 1 oz. of water, versus 2 TB = 30 cc per 6 oz. water in a French Press = 5 cc ground coffee per 1 oz. of water), perhaps because the very short brew time requires a bit more coffee to achieve the desired strength, or maybe because I can make the coffee stronger since it has no bitterness.

UPDATE October 5, 2007: I notice that the coffee doesn't seem to have the aroma that coffee from my French Press had. At times it has tasted a bit "flat," too. This is a result of the paper filter absorbing some of the flavor oils (one reason I was a bit cautious about the AeroPress).
Some have recommended letting it steep longer - i.e., for 1 minute or even a French-Press-comparable 3 minutes - by first inserting the plunger and then inverting it, and pouring the coffee and water in via the bottom of the tube (and covering it until ready to put on the cap and filter and turn it over and plunge it), or by pulling the plunger UP slightly after insertion to create a slight vacuum and prevent any flow-through until ready to plunge. (If you pull it up too much, though, it will suck the filter away from the cap, and the water will start pouring through!)

Even then, though,
there are apparently limits that the AeroPress can't pass.

I discovered that I've been making it way too hot. I've been waiting a few seconds after my tea kettle boiled before pouring the water, but when I poured water into the plunger and first used a digital instant-read thermometer to see when it reached 175°, I was surprised that it took a lot longer than I expected. So I now pour out my water before the boil and use the thermometer to check the temperature before pouring it into the coffee, as the AeroPress instructions recommend 165-175° for optimum flavor.

UPDATE October 10, 2007: Despite the lack of some of the flavor oils, AeroPress coffee has its own flavor and quality that still makes it (to me) about the best cup of coffee I've had. While it may be worth the trouble to get a 5 micron polyester filter and use the inverted (i.e., upside-down) method to get the oils into the cup
as the folks here suggest, I am currently pretty content with the regular AeroPress procedure with the AeroPress paper filters.

UPDATE October 20, 2007: I bought a second AeroPress today so I wouldn't have to bring mine home every weekend.

Shortly after I had gotten my $125 (retail) Starbucks Barista conical burr grinder, I did a blind comparison with my $20 blade grinder using my drip coffeemaker. The burr ground coffee had a noticeably fuller flavor.

Based on comments of other AeroPress users, I decided to see if there was any noticeable difference with the AeroPress between burr-ground coffee and blade-ground coffee. I ground 1.5 scoops of a fresh decaf Sumatra City Roast (roasted yesterday) in each of my grinders, and pressed/brewed them both at the same time with 175° water I had filled to the "(2)" mark in the plunger. As far as I could tell, there was not a noticeable difference in taste.

This means that I can take my quiet blade grinder to work and grind my beans there before making each cup. The coffee will taste fresher and I won't have to wake my wife up with the noise of the burr grinder (or even the blade grinder) each morning. On the other hand, it's quite a bit messier, esp. digging out the compacted fine coffee, so I may continue with my burr grinder, but grind it the night before or in another room.

UPDATE November 15, 2007: Though I initially used the Espresso grind setting (or one step coarser) on my Starbucks Barista Burr grinder, I found that the coffee was perhaps too fine, because it took a lot of pressure (and time) to push the water through. Grinding it three steps coarser than Espresso - i.e., about halfway between Espresso Grind and Drip Grind - seems to a better setting. While I found that the coffee tasted just as good if I used a blade grinder (and I even took mine to work for awhile in order to grind the beans right before brewing), the fineness of the grind made it very difficult to press, so I went back to using the burr grinder at home and taking ground coffee to work.

Thursday, June 7, 2007

Friends Don't Let Friends Drink Bad Coffee

Several months ago - late last year, in fact - a news article about this Website introduced me to the art and technique of making good (or, rather, better) coffee:
"Better office coffee is not hard to make. Anyone can do it. All you need are a few simple supplies, some know-how and a desire for better tasting brew. We spent nearly two years slaving away in our cubes figuring out how to use a French Press to make great coffee and this website was created to share our knowledge and experience with all the other cubicle workers of the world."

So, get yourself one of these:


and some of these:

and one of these:

and one of these:

and start off each day with a delicious one of these: